Configuration

• Calibration of the temperature measured by the temperature sensor
• Grenton Dali - Dali Discovery
• Control of the uncoloured LED stripe with the use of a single LED RGB module channel with the use of monostable button
• Running the selected channel of the LED RGBW module with the last value
• Averaging values from multiple temperature sensors
• Script Builder - creating advanced Grenton system logic configuration
• Creating a logical sum and a logical product
• Control a group of roller shutters using a single widget in the myGrenton application
• Rounding the variable to decimal places
• Multiple clicks configuration
• Time display in hh:mm format
• Rounding the variable to an integer value
• Controlling the floor heating with the protection before overheating of the floor.
• Calculating of the dew point temperature
• Creating string variable by adding values of other variables
• Storing the state of outputs based on the persistence of user features
• Creating a virtual object Thermostat with a source (temperature) from another CLU type module
• Control the single-color LED strip within 0-100% using the SLIDER widget
• FCU (Fan Coil Unit) Basic Configuration
• Monitoring events using diagnostic logs
• Verifying the cause of CLU entering into Emergency mode using diagnostic logs
• Push history
• Temperature calculation based on voltage measurement from a 0-10V sensor
• Group control of RGBW LED module channels via the myGrenton application
• Controlling a single-color LED strip using a single channel of the RGBW LED module with a monostable button
• Application and configuration of the solenoid valve cutting off the main water supply.
• iOS Shortcuts
• DALI group control
• CCT LED strip control
• Thermostat virtual object - Analog 0-10V output control.
• Control of a heating zone with more than one actuator
• Controlling the temperature using an Infibity radiator thermostat
• Output status indication on the touch panel diodes